GoPiGo3¶
For GoPiGo3, you will need to install the gopigo3 python module (which is
different from older versions). It will need to be installed with the
installation script from Dexter. Also, PYTHONPATH needs to be set to
/home/pi/Dexter/GoPiGo3/Software/Python
Refer to this: https://github.com/DexterInd/GoPiGo3
pi@raspberry:~$ sudo git clone https://www.github.com/DexterInd/GoPiGo3.git /home/pi/Dexter/GoPiGo3
pi@raspberry:~$ sudo bash /home/pi/GoPiGo3/Install/install.sh
pi@raspberry:~$ sudo reboot
Configuration Options¶
| Variable | Default Value | Description |
|---|---|---|
drive_time |
0.35 |
Time in seconds to run the motor for each forward/back command. |
turn_time |
0.15 |
Time in seconds to run the motor for each turn command. |